Stopping distance at 70mph

At 20mph, the braking distance is exactly the same as the thinking distance. These combine to provide a total stopping distance of 12 metres. At 70mph, the 75-metre braking distance makes up nearly 80% of the overall 96-metre stopping distance. READ NEXT: The RAC's top fuel saving tip Stopping distance 70mph: 315 feet: Stopping distances chart in metres. As above, the following chart is based on a typical car, with legal tyres, good brakes and good weather / dry roads. The following chart is for stopping distances in metres based on UK speed limits. Thinking distance Distance 2: Braking. Distance: Overall. Stopping Distance: Comparisons. 20 mph: 20 feet 20 feet 40 feet: 30 mph: 30 feet 45 feet 75 feet: Full length of tractor/semi-trailer or articulated wagon: 40 mph: 40 feet 80 feet: 120 feet: 50 mph: 50 feet: 125 feet: 175 feet: 60 mph: 60 feet: 180 feet: 240 feet: 70 mph: 70 feet: 245 feet: 315 feet (USA.

Stopping distances made simple RAC Driv

Vehicle Stopping Distance and Time Highway traffic and safety engineers have some general guidelines they have developed over the years and hold now as standards. As an example, if a street surface is dry, the average driver can safely decelerate an automobile or light truck with reasonably good tires at the rate of about 15 feet per second (fps) Total stopping distance is the distance your vehicle travels from the time you see a hazard and press on the brake until the vehicle stops. Total stopping distance is made up of three parts: Perception Distance - The distance a vehicle travels while a driver is identifying, predicting and deciding to slow down for a hazard

With correct parameters, it's a perfect equation for an accurate calculation of the stopping distance of your car. The AASHTO formula is as follows: s = (0.278 * t * v) + v² / (254 * (f + G) The Overall Stopping Distances are DOUBLED (x 2)for wet roads and multiplied by TEN (x 10)for snow and icy conditions. Below is a chart showing a system for working out the Overall Stopping Distancein feet. Example: 30mph x 21⁄ 2 = 75ft Thinking Distancein feet is the same as the speed travelling at. Example: 30mph = 30ft think distance It launches hard from zero to 60 mph in 2.7 seconds and stops harder, with a 70-mph-to-zero stopping distance of 133 feet. Michael Simari Car and Driver. 20 of 32

In good conditions, what's the typical stopping distance at 70 mph? Question topic: Car, Safety margins. A: 53 metres (175 feet) B: 60 metres (197 feet) C: 73 metres (240 feet) D: 96 metres (315 feet) Post navigation Overall stopping distance for vehicles travelling at high speed The graphic below demonstrates the effect of increased speed on stopping distance. The base speed used is 70mph. The higher speeds compared are 100 and 140mph. The reaction time used is the same as that used by the Highway Code. In practice many driver Stopping distances chart in feet Thinking distance Braking distance Stopping distance Thinking distance 60mph: 60 ft. Braking distance 60mph: 180 ft. Stopping distance 60mph: 240 feet Thinking distance 70mph: 70 ft. Braking distance 70mph: 245 ft. Stopping distance 70mph: 315 fee The answer you require; if you are taking the UK driving test; are the figures published in the U.K. Highway Code; Speed Stopping Distance 20mph. 12 Meters / 40 Feet 30mph. 23 Meters / 75 Feet 40mph. 36 Meters / 118 Feet 50mph 53 Meters / 175 Feet.. Stopping distance 70mph: 315 feet: How many car lengths is a safe distance? The first of these was the car length rule. This was a rule of thumb decreeing that for every 10 mph of speed the following distance should be one car length. At 20 mph, following distance would be two car lengths, and at 60 mph six car lengths

The calculated and design stopping sight distances are shown in Table 2-1. The values given in Table 2-1 represent stopping sight distances on level terrain. As a general rule, the sight distance available on downgrades is larger than on upgrades, more or less automatically providing the necessary corrections for grade.. See, if you got this brain-teaser wrong, it's probably because you thought the stopping distance increases proportional to speed. Eighty mph is one-third faster than 60 mph; therefore, you may.

Stopping Distances - Driving Test Tip

At 70 mph we do the same. 70 plus half of 70 which is 35, add the two figures together means that at 70 mph we will travel 105 feet in one second. Makes you realise the reality an First let us calculate what the stopping distance is at 10 mph. 10 mph is equal to about 14 feet per second. There are 5,280 feet in a mile and 3,600 seconds in an hour, so to convert miles per hour to feet per second you just multiply your mph by 5,280 and divide by 3,600

Are The Highway Code Stopping Distances Rubbish? - Motorhive

Stopping Distances - Drive and Stay Aliv

  1. Our tests are conducted from 60 mph, measuring the distance it takes the vehicle to come to a complete stop using onboard test instruments. We perform this test in both dry and carefully.
  2. Increasing kinetic energy also increases stopping distance. Increasing the speed limit to 80 mph would increase the average stopping distance on motorways to 120 metres (30 car lengths!), a 25% increase on the 96 metre stopping distance found at 70 mph.
  3. 70 mph: 103 feet: 245 feet: 348 feet: 23: 80mph: 117 feet: 320 feet: 439 feet: 29 . Notice that when you double your speed - say, from 30 mph to 60, or 40 to 80 - your total stopping distance more than doubles: it triples! When it comes to braking, always follow these three key defensive driving principles
  4. \[\underline{stopping\ distance = 12 + 130 = 142~m}\] Estimates example - Higher Estimate the braking force needed to stop a family car from its top speed on a single carriageway in 100 m

This means that average total stopping distance − including thinking and braking distance − is an extra 2.75 car lengths (11 metres) at 30mph and an extra 3.75 car lengths (15 metres) at 40mph compared with the distances used in the Code. This difference rises to an additional 6.25 car lengths (25 metres) at 70mph To accurately calculate the stopping distance of the vehicle, different factors are taken into consideration. Reaction Distance One such factor is the perception of an impending danger. The driver of a passenger vehicle usually takes 1.5 seconds to perceive a dangerous situation and apply the brakes. This time is about the same for the average. This is the set-up that resulted in a superb stopping distance of 40.7m from 70mph. If you stick with the steel brake discs, they come with 370mm front rotors and 361mm items at the back Is the Stopping Distance 3D Simulator helping you to understand this often confusing topic? Why not get our award-winning Driving Theory Test 4 in 1 App that'll make sure you cover everything else that's included in the 2020 Theory Test for learner drivers?. It's a snip at £4.99 - available for both iOS and Android users The slower you are going the shorter the stopping distance is. E.G. Speed of a car Thinking distace Breaking distance Total stopping distance mph meters meters meters 30 9 14 23 40 12 24 36 50 15.

Because of this, the typical stopping distance at 70mph is 96 metres, while the stopping distance at 50mph is 53 metres, little more than half as much. The stopping distance at 30mph is just 23 metres, about six car lengths. REACTION The overall stopping distance formula considers two different things: the braking distance and the thinking. At 30mph - 40mph, the risk of loss of life to pedestrians is significantly increased. Allowing 9m - 12m of thinking time and up to 24m of the braking distance will give you the opportunity to react and avoid a potentially fatal accident. In practical terms, this is around 6 - 9 car lengths. Travelling above 50 mph (and up to 70mph So the stopping distance at 70mph is 24 car lengths. Can you count 24 cars back in the traffic jam to see how far this is? Fill in the table. Speed mph: Thinking Distance m: Braking Distance m: Stopping Distance m: Car Lengths: 20: 6: 6: 30: 9: 14: 40: 12: 24: 50: 15: 38: 60: 18: 55: 70: 21: 75 Easy Stopping distance formula. As you can see if you start from 20 mph and multiply by 2 then you get the stopping distances for 20 Mph, then for 30 mph multiply by 2.5 and so on, just start at 20 x 2 and go up by half for each additional 10 mph. so 20mph x2, 30mph x 2.5, 40mph x 3 and so on Start studying Stopping distances. Learn vocabulary, terms, and more with flashcards, games, and other study tools. Search. Create. Log in Sign up. Log in Sign up. Stopping distances. Stopping distance at 70mph. 96m. 12m is _ car lengths. 3. 23m is _ car lengths. 6. 36m is _ car lengths. 9. 53m is _ car lengths. 13. 73m is _ car lengths. 18

Thinking time plays a huge part in stopping distances. If you're travelling at 70mph, for instance, it's possible that you could cover the length of four cars before you even put your foot on the brakes. The Highway Code has created a table of stopping distances for the average family car, but for a van you can expect the distances to be. Highway code figures were first published 40 years ago and as a bit of fun we test what results we'd get in a modern car. Vbox Sport:www.vboxmotorsport.co.u.. Consequently, a car traveling at 70mph may reach a full stop 300ft after the driver has noticed a potential threat. The average sedan is about 15ft long, and an SUV isn't too far behind at 16-17ft. As such, a car traveling at 70mph may need to keep an 18-19 car distance between vehicles in front of them to avoid an accidental collision What is the stopping distance at 70mph? It is estimated that on a typical, dry road, a typical car travelling at 70mph has a stopping distance of 96 metres or 314 feet. To add some more perspective to those figures, this stopping distance is measured as the equivalent of 24 car lengths

Stopping Distances - Truck Smar

Stopping Distance Calculator

Stopping Distance Calculato

  1. Braking distance. Braking distance is the distance it takes to stop your vehicle once you apply the brakes. At 65 mph, it takes an additional 5.5 seconds or about 525 feet of actual brake application to stop your vehicle. Stopping distance calculation. Stopping distance is the total distance needed to bring your vehicle to a complete stop
  2. The stopping distance depends on two factors: Thinking distance and braking distance. It is a fact that needs to be committed to memory in order to pass your theory test. But, recent studies suggest it might be wrong. 70mph: 96 Meters / 315 Feet
  3. You'll see from the chart below, the overall stopping distance is split in to 2 parts - thinking distance (in blue) and braking distance (in red.) A combination of both gives you overall stopping distance. Thinking distance from 20mph starts at 6m and always goes up in 3's i.e. 6,9,12,15,18,21. This is how far your vehicle has travelled.
  4. \[stopping \\ distance = 12 + 130 = 142 \\ m\] Estimates Example - Higher Estimate the braking force needed to stop a family car from its top speed on a single carriageway in 100 m
  5. Typically EBA will reduce stopping distance by 2m (from 11 to 9m) at 30 mph; by 5m (30m to 25m) at 50 mph and by 10m (60m to 50m) at 70 mph. Just to keep things consistent, here are the deceleration numbers taken from a Ford Mondeo, with and without EBA, using a trained driver

To calculate the total stopping distance of an average vehicle, take the speed and multiply it by the first number of that speed. For example, if you are driving through your subdivision neighborhood only 5 mph over the 25 mph limit, your car will travel 90 feet from the time you decide you need to stop and the time your car comes to a rest 70mph: Revised stopping distances: 19m: 34m: 51m: 71m: 95m: 121m: Why Highway Code stopping distances are important. Get your stopping distance wrong and this is what happens. The Highway Code stopping distances are used by learner drivers as a gauge to judge their braking by. If that gauge is faulty and they think they can come to a stop. This would mean the thinking distance in most cases would be over double than that stated in The Highway Code, and it's possible that at 70 mph a driver or rider would be covering over 200 feet (over 60m) before they even applied the brakes. Stopping distance: this is the time it takes for your vehicle to stop when you apply the brakes In good conditions, what's the typical stopping distance at 70 mph? Save All Questions | Saved Questions | Completed Questions Incomplete Questions. Question Topic: Safety margins. Mark one answer. 96 metres (315 feet) 73 metres (240 feet) 53 metres (175 feet) 60 metres (197 feet

Stopping Distances - Truck Smart

70 mph = 70 ft thinking, 245 ft braking = 315 ft. Another way to remember (And you can do this in your head) is that thinking distance is the same as the speed, ie at 70 thinking distance is 70 as we all now, to calculate the stopping distance is this, just multiply the speed increments going up by .5. 30 x 2.5 = 75 40 x 3 = 12 In good conditions, what is the typical stopping distance at 70mph Vehicle stopping distances, however, addthinking distance - the distance you travel while your brain reacts to a hazard and you press the brake. No matter how alert you are, at high speeds, this isn't insignificant: at 70mph you could cover the length of four cars before you even apply the brakes On average, the stopping distances of a truck that is traveling on dry ground at 65 MPH is anywhere between 335 to 400 feet. This number changes with the weight of the truck. A truck with an 80,000 pounds load isn't going to stop at the same distance as an empty truck. In fact, the loaded truck should stop quicker The stopping distances for a car travelling at 20 mph and 40 mph are 40 feet and 120 feet respectively. Estimate the stopping distance for a car travelling at 70 mph. A driver sees a hazard 150 feet ahead. What is the maximum possible speed of the car at that moment if a collision is to be avoided

These Are the Shortest-Stopping Cars We've Ever Teste

70mph x 4.5 = 315 feet. If you work in metrics, simply divide the distance (in feet) listed above by 3.3 to get the stopping distances in metres. Thinking distance is quite simply how long it takes for the driver to react to a hazard and then to brake. The slower the car is travelling, the shorter the overall stopping distance. The stopping. The stopping distance is the reaction distance + braking distance. First we calculate the reaction distance: Even after showing this to all of them, they still believe 1-2 car lengths is good enough at 70 mph regardless of me showing them it take 7-8 car lengths to stop from 60mph,. Imagine two identical cars on a motorway, one travelling at 70 mph, the other at 100 mph. As they draw alongside, they see at the same instant, an obstruction ahead blocking the whole carriageway, and start braking. The distance is such that the slower car just comes to a halt, making a brushing contact with the obstruction Under ideal conditions, the FMCSA calculates the stopping distance of semi-trucks vs. cars as follows: A normal passenger vehicle traveling at a speed of 65 miles per hour would take about 300 feet to stop. For a fully loaded commercial truck, the stopping distance of it running at 65 miles per hour is about 525 feet That's about as close as I've seen anyone get up behind me at 70mph - think he was in a rush as even with a wide angle lens he's close! Home. Best Dash Cams of 2021. Comparison Tool. Articles. A safe stopping distance at 70mph? Thread starter reverend; Start date Sep 28,.

In the UK, the typical total stopping distances (thinking distance plus braking distance) used in The Highway Code are quoted in Rule 126 as: 20 mph: 40 feet (12 metres) 30 mph: 75 feet (23 metres) 40 mph: 118 feet (36 metres) 50 mph: 175 feet (53 metres) 60 mph: 240 feet (73 metres) 70 mph: 315 feet (96 metres) See als 70 mph 21 m (112 km/h) = 12 metres (40 feet) or three car lengths The distances shown are a general guide. The distance will depend on your attention (thinking distance), the road surface, the weather conditions and the condition of your vehicle at the time Thinking Distance Braking Distance Average car length = 4 metres (13 feet 70 mph x 4.5 = 315 feet (96 metres or 24 car lengths) What can affect car stopping distances? Despite having a formula to follow, there are often many other factors that can affect the actual stopping distance of a car: Weather - weather conditions can affect stopping distance immensely. In poor conditions, such as heavy rain, braking is. Express your answer as a multiple of the stopping distance at 25 . math. The stopping distance (s) of a car varies directly as the square of its speed (v). If a car traveling at 50 mph requires 170 ft to stop, find the stopping distance for a car traveling at v2 = 55 mph. cal

In good conditions, what's the typical stopping distance

  1. The concept introduced in the addendum is actually correct, but it applies to the BRAKING distance not the total stopping distance - which includes the thinking distance. So by multiplying the braking distance at 40mph by 4, and then finding the trend for the thinking distance (which is simple - t(n) = 3n)
  2. However, when travelling at 70mph, this stopping distance increases even further, with women stopping 21.48 metres earlier than men. A car insurance expert at Uswitch said: 'We all assume that.
  3. Say you are traveling to the standard speed limit of 70mph on the motorway and, according to the Highway Code, your stopping distance overall here should be 315 feet as a guide. This effectively means you are looking at around the 105-metre mark for your stopping distance

70mph x 4.5 = 315 feet If you really need to have your stopping distance in meters, just divide the distance in feet by 3.3 to get the stopping distance in meters. That bit isn't so simple, so you might need a calculator for it. Expert Trainin Typical stopping distances (which include thinking and braking time) in dry weather are around 96m at 70mph, so that could be almost 200m in the wet. The braking portion of stopping from 50mph is around 38m (so you have to add in the thinking portion, too, which takes it up to around 75m). On a dry road the shortest stopping distance from 60mph. Vehicle Stopping Distance Calculator This calculator is used to determine the stopping distance of a vehicle when the vehicle's initial speed, roadway friction and roadway slope are known. The friction table below can be used to approximate the roadway friction based upon different roadway surface types and whether or not the surface is wet or dry Another key factor is a short stopping distance—the length of road needed to slow down the car. That's why we measure 70-mph-to-zero performance on all vehicles we test

What is the stopping distance of a car in dry weather at

What's the stopping distance at 70 mph? - Quor

Motorcycle Stopping distance. At 30 mph your braking distance will be 14 metres (about 45 feet) while at 70 mph that distance will increase to 75 metres (about 245 feet). That's just over double the speed but more than five times the braking distance. How to Brake. Many motorcycle riders are, quite wrongly, afraid to use the front brake. So, the overall stopping distance at 30 mph (if you leave 1 metre for every 1 mph), will leave you plenty of space to brake and stop should you need to, without impacting the vehicle in front, or having to make a dangerous swerve or lane change, and reduces the chance of a potentially disastrous skid

At 70 mph, the first test subject showed a normal reaction time of .39 seconds. This change to .48 while writing a text and .50 while reading. At 70 mph, every second increases the stopping distance 103 feet. This means this subject's stopping distances was changed to 31 feet while composing a text. While drunk, he only drove an extra 15 feet Road safety charity Brake believes the Highway Code's stopping distance figures are incorrect, and we should all be leaving even more room for braking safely. Working with the Transport Research Laboratory (TRL) , Brake has concluded the average thinking time when reacting to an emergency braking situation is 1.5 seconds - more than double. What is the stopping distance for semi-trucks? By Nick Economu. May 17, 2019. Truck drivers, imagine this scenario: It's a beautiful sunny day and you are traveling along with traffic at 60 mph, when the vehicle in front of you suddenly slams on its brakes The stopping distance is the distance covered between the time when the body decides to stop a moving vehicle and the time when the vehicle stops entirely. The stopping distance relates to factors containing road surface, and reflexes of the car's driver and it is denoted by d. The SI unit for stopping distance meters. The Formula for. Total stopping distance for a car going 65 miles an hour is just over 100 yards or about 345 feet. Factors in Stopping Distance of Big Rigs. There are several factors involved in calculating the stopping distance for a particular event. Every driver has a perception lag and also a reaction time before the driver can react actually to start to.

In normal conditions, the stopping distance at 70mph is 96 metres (315 feet), or 24 car lengths. There are a variety of other factors, however, that can affect stopping distance - such as. Understanding stopping distances at different speeds is paramount when driving a vehicle in any type of weather. Stopping distances vary. Whether it's coming to a slow, controlled pause at traffic lights or an emergency stop to prevent a collision, it's vital that you're able to brake in time when you're behind the wheel. One of the biggest contributors to road traffic accidents is. About Speed Distance Time Calculator. This online calculator tool can be a great help for calculating time basing on such physical concepts as speed and distance. Therefore, in order to calculate the time, both distance and speed parameters must be entered. For the speed, you need to enter its value and select speed unit by using the scroll down menu in the calculator

The stopping distance of trucks increases with heavy loads, which cause them to accelerate more quickly when going downhill and take longer to come to a complete stop. According to FMCSA, trucks are often 20 to 30 times heavier than passenger vehicles. The average weight of a car is about 2 tons (4,000 pounds), but the average weight of a semi. The thinking distance is the same in feet as the speed in mph.... so at 30 mph, thinking distance is 30 feet. At 70 mph thinking distance is 70 feet. To get the braking distance you square the speed and divide by 20. so at 30mph, braking distance is 30 x 30 /20 = 45 feet. at 70mph, braking distance is 70 x 70 / 20 = 245 fee

How much does stopping distance increase in wet conditions

According to Car and Driver, an Alfa Romeo going 70 mph requires 177 feet to stop. Assuming that the stopping distance is proportional to the square of the velocity, find the stopping distance. The average stopping distance for a loaded tractor-trailer traveling at 55 mph (in ideal conditions) is 196 feet, compared with 133 feet for a passenger vehicle. 79. Did You Know? Braking distance can be greatly affected by road surfaces, weather conditions such as rain, ice, and snow, or debris. 78

Video: Roadway Design Manual: Sight Distanc

Braking distance is more affected by speed than thinking distance is - the difference in thinking distance between 30-70mph is just 15m, while the difference in braking distance is 69m. Thinking. An increase in speed from 70 mph to 80 mph is a 14% increase in speed but this results in a 31% increase in kinetic energy, making the car - in a sense - 31% more dangerous to other road users. Increasing kinetic energy also increases stopping distance According to that, maximum emergency stopping distance from 300km/h (186mph) is 3500m (about 2 miles), and each passenger car axle is equiped with 4 brake discs - with wheel slide protection. Of course, normal service braking would use dynamic/regenerative braking as much as possible, and normal braking rates have to take account of passenger.

It Takes Nearly Twice as Long to Stop from 80 MPH vs

Road rules: safe distance - YouTube

Car stopping (braking and thinking) distances at different

The stopping distance includes a thinking time of 0.67 seconds, this can add as much as 21 metres onto the braking distance at 70mph. The stopping distance is based on most worn tyre fitted to the vehicle travelling in wet conditions at 50mph Stopping distances in the Highway Code are woefully short because they underestimate drivers' thinking time, road safety campaigners have claimed.. A study commissioned by charity Brake. What factors affect stopping distances? Weather: Stopping distances in bad weather conditions can be much longer. Braking distances can double on wet roads - and increase tenfold on snow or ice. It could take a car more than the length of seven football pitches to stop from 70mph on icy roads Thinking Distance + (Stopping Distance x10) = Total Stopping Distance That means if you are travelling at 70 MPH on an icy road it could take you up to 771m to stop your car. That is the equivalent of half a mile or the length of 8 football pitches

Stopping Distances for Cars and Lorries

The handbook also provides stopping distances at various rates of speed, factoring in the average 1.5 seconds it takes a driver to think, react, and apply the brakes. At 50 mph, that distance is 229 feet. At 70 mph, it increases to 387 feet. Texas law, like the laws of most states, creates a conundrum for drivers i have my theory test soon and am having trouble remembering stopping distances on dry and wet roads would anyone have an easy way to remember them? their asking the speed in km/h and how many meters it takes to sto

Cars With the Best and Worst Braking Distances - Consumer

Is 80mph worth it? - Rio Driving Schoo

In addition, in the most recent Consumer Reports test of Minivans, the completely redesigned, and new top ranking Toyota Sienna's 60-0 stopping distance is 152 feet (compared to CR's 60-0 for the MDX of 151 feet). The previous, and long-standing CR top pick in minivans was the Honda Odyssey which had a 60-0 stopping distance of 147 feet Where a calculation requires a stopping distance or an average stop deceleration then *Calculate the stopping distance for initial speed of 12m/s. At 70mph, the 75-metre braking distance makes up nearly 80% of the overall 96-metre stopping distance. q: How do I calculate the stopping time of a vehicle with respect to its stopping distance

Experts want Highway Code stopping distance reviewedVehicle (automobile) dynamics
  • Adding fractions bbc bitesize gcse.
  • Leaked credit cards 2020.
  • Ipad: soft reset vs hard reset.
  • Mallorca to Ibiza distance.
  • Detective salary vic.
  • Guinness World record largest domestic cat.
  • Care home fees Scotland 2020.
  • Pokemon Generator hack.
  • How many network drives can be mapped.
  • Why does newly gained experience with groups work to reduce prejudice.
  • Wicanders cork flooring.
  • Dun and Bradstreet phone number.
  • Aqw Void Paladin Slayer Blade.
  • Best time to drink water in a day.
  • Direct Access bike test guaranteed pass near me.
  • How to improve strength and power.
  • How long do police officers work before retirement.
  • Energy Assistance programs near me.
  • Bat cone Dimensions.
  • Can you change judges in a child custody case.
  • FMEA RPN limit.
  • Best lactose intolerance test UK.
  • Medicare eligibility Illinois.
  • Costco Goodyear tyre offer.
  • Lennox Town Center 24 Theatres.
  • Decipherable meaning in Telugu.
  • Highest vitamin C foods.
  • Random T shirt bundle.
  • ICQ forum.
  • Awaiting certificate meaning.
  • Any PDF to DWG Converter Full Crack.
  • Example of external style sheet.
  • Aya Center near me.
  • In digital system subtraction is performed by using.
  • What device sends and receives radio signals in a wireless network mcq.
  • Mass Health Connector phone number.
  • Post slider in HTML.
  • Astronaut training spinning machine.
  • Sphere volume calculator.
  • Importance of trade policy.
  • Kathy Fields height.